Very likely the perpetrator of a string of smash & grabs at Tim Hortons and Dunkin Donuts.
I imagine there was a lot of 'littering', too!
Search found 9841 matches
- Fri May 17, 2024 10:37 pm
- Forum: Chit-Chat
- Topic: Police Nab a Feline Felon
- Replies: 1
- Views: 53
- Thu May 16, 2024 11:12 pm
- Forum: U.S. Military Krags
- Topic: Parkhurst carbine
- Replies: 47
- Views: 11244
Re: Parkhurst carbine
A quick experiment: Today, I put a NOS model 1896 bolt into a model 1899 carbine. It did not rotate fully closed. The underside of the 1896 bolt handle made slight contact, with the stock wood of the model 1899 bolt notch. However, I was surprised the bolt did close far enough that the striker relea...
- Thu May 16, 2024 3:10 pm
- Forum: U.S. Military Krags
- Topic: Parkhurst carbine
- Replies: 47
- Views: 11244
Re: Parkhurst carbine
I've always had good dealings with S&S Firearms. IIRC - The company's founder(s) had a connection, through marriage, to the Bannerman family. Back in 1968 to 1976, when I went to CW shoots at the North-South Skirmish Association range at Winchester, Virginia, S&S Firearms had a large booth i...
- Wed May 15, 2024 3:48 pm
- Forum: U.S. Military Krags
- Topic: Parkhurst carbine
- Replies: 47
- Views: 11244
Re: Parkhurst carbine
Very nice Tom, the 'Parkhurst Clips' beautifully accessorize your carbine. Thanks for sharing!
(Any thoughts, about my theory, that the 'hole' in your stock's bolt-notch provided clearance for a model 1896 bolt-handle)?
(Any thoughts, about my theory, that the 'hole' in your stock's bolt-notch provided clearance for a model 1896 bolt-handle)?
- Tue May 14, 2024 2:09 am
- Forum: U.S. Military Krags
- Topic: Parkhurst carbine
- Replies: 47
- Views: 11244
Re: Parkhurst carbine
Oh, you were referring to the 'headless' cocking-piece on Tom's Parkhurst carbine.
- Tue May 14, 2024 12:12 am
- Forum: U.S. Military Krags
- Topic: Parkhurst carbine
- Replies: 47
- Views: 11244
Re: Parkhurst carbine
Bill: If you are referring to the 'flat area', on the bottom of the bolt handle, the bolt with the long 'flat' is an 1898 bolt. The shorter 'flat' is a feature of model 1896 and 1892 bolts. The model 1898 receiver had some simplification in shape and machining steps. The receiver and stock changes (...
- Mon May 13, 2024 12:25 am
- Forum: U.S. Military Krags
- Topic: Parkhurst carbine
- Replies: 47
- Views: 11244
Re: Parkhurst carbine
I am noticing 'impression marks' in the wood (arrows). I suspect a model 1896 bolt was being used with your 'Parkhurst' carbine, at some time.
The drilled hole in the stock 'notch' may have been an attempt to achieve some wood-clearance for an incorrect model 1896 bolt-handle?
The drilled hole in the stock 'notch' may have been an attempt to achieve some wood-clearance for an incorrect model 1896 bolt-handle?
- Sun May 12, 2024 3:30 pm
- Forum: U.S. Military Krags
- Topic: Guide Lip Issue
- Replies: 10
- Views: 368
Re: Guide Lip Issue
You did not mention the 'crack' in the plate at the start of this thread.
The plot thickens .... that guide lip will ultimately fail.
You will have to reuse the current rivet or make one.
The plot thickens .... that guide lip will ultimately fail.
You will have to reuse the current rivet or make one.
- Sun May 12, 2024 3:58 am
- Forum: U.S. Military Krags
- Topic: Guide Lip Issue
- Replies: 10
- Views: 368
Re: Guide Lip Issue
POHO - I simply reset the original rivet, so that the 'guide-lip' plate was locked securely in place.
There was no need to disassemble anything.
IMO - You are making something simple, more complicated than it needs to be.
You probably already fixed it!
There was no need to disassemble anything.
IMO - You are making something simple, more complicated than it needs to be.
You probably already fixed it!
- Sat May 11, 2024 7:56 pm
- Forum: U.S. Military Krags
- Topic: Guide Lip Issue
- Replies: 10
- Views: 368
Re: Guide Lip Issue
I put a "parts Krag" together, starting with a basically 'stripped' action. The receiver did have its guide lip, but it was bent & loose on the rivet. I judiciously tapped the guide into proper shape using a copper mallet and a hardwood block for support. I 'punched' the inside-end of ...