Search found 32 matches

by geezmo
Thu Apr 30, 2015 8:25 pm
Forum: Ammunition, reloading, shooting, etc
Topic: Frankford Arsenal 1907 Bench Reloading kit
Replies: 4
Views: 5527

Re: Frankford Arsenal 1907 Bench Reloading kit

I just checked the auction results on line. This set brought $4,112.50 (including the buyer's premium of 17.5%).
by geezmo
Tue Apr 28, 2015 8:25 pm
Forum: Ammunition, reloading, shooting, etc
Topic: Frankford Arsenal 1907 Bench Reloading kit
Replies: 4
Views: 5527

Re: Frankford Arsenal 1907 Bench Reloading kit

I looked them up in Col. Brophy's books on the Krag and the '03's. He doesn't mention number made, but that they were available at a regimental level. The implication being that there were more than 25 sets. Either way, when I see individual components offered, they bring pretty good money. I'm sure...
by geezmo
Sun Apr 05, 2015 11:50 am
Forum: Ammunition, reloading, shooting, etc
Topic: Junk Yard Krag
Replies: 5
Views: 6287

Re: Junk Yard Krag

I'd say keep it and shoot it. Maybe for harder use, like hunting, etc. If you really don't want it around, maybe you could pass it on at a modest price to a young would be collector on a limited budget. Get someone else hooked on the hobby. The last thing I would do is break it up for parts. Even th...
by geezmo
Sat Apr 07, 2012 8:36 pm
Forum: Older threads
Topic: Reproduction carbine stocks
Replies: 8
Views: 9038

Re: Reproduction carbine stocks

Try Michael Kokolus from Dushore, Pa. at gunstockduplicating.com , He usually sets up at the Allentown, Pa. shows. Many different stocks, I've seen him with Krags. Didn't look like they required too much work.
by geezmo
Tue Jun 28, 2011 10:11 pm
Forum: Older threads
Topic: Was $400 too much to pay for a 1896 C rear sight?
Replies: 2
Views: 2446

Re: Was $400 too much to pay for a 1896 C rear sight?

I saw one go for $600 once. Would I pay that, or even $400, probably not. One thing to consider is if you're into the carbine cheap enough (before the site) what does it matter? Compare your total investment, to what the retail value may be. The rest is irrelevant.
by geezmo
Sat Dec 30, 2006 11:27 pm
Forum: Older threads
Topic: 1898 sight
Replies: 9
Views: 5705

Re: 1898 sight

Dave,<br />Work your way back a couple of years in the forum. I seem to remember quite a few posts on reloading. Anything from loading blanks, neck sizing, cartridge case flow during ignition, mild loads, bullet weights, powder types and burn rates, etc. You should find some good answers there.<br /...
by geezmo
Sat Dec 30, 2006 3:05 pm
Forum: Older threads
Topic: 1898 sight
Replies: 9
Views: 5705

Re: 1898 sight

Dave,<br />I agree with Dick. The first thing to do is get the book from northcape. Also, check the forum for the extensive discussion on the merits of the Mallory and Brophy books. These are only necessary if you're going to get deep into Krags. As for the stock, if it's only a couple of minor crac...
by geezmo
Sat Dec 30, 2006 2:30 pm
Forum: Older threads
Topic: need help or info
Replies: 3
Views: 2067

Re: need help or info

If it's just a clean crack, you should be able to glue it. Some of the epoxies available today are stronger then the original wood. If you're not comfortable doing it, a gunsmith should be able to help you. If you really insist on replacing the stock, cut downs are on ebay frequently, for reasonable...
by geezmo
Fri Dec 22, 2006 6:00 pm
Forum: Older threads
Topic: Krag Book Recommendation-Brophy or Mallory/Olson
Replies: 16
Views: 80000

Re: Krag Book Recommendation-Brophy or Mallory/Ols

There's a Brophy book on ebay, current bid, $59, with a little over 4 hours to go.
by geezmo
Fri Dec 22, 2006 5:47 pm
Forum: Older threads
Topic: Help please
Replies: 3
Views: 2138

Re: Help please

Your Krag was made in 1894, and is a Model 1892 rifle. Most of these were rebuilt to Model 1896 configuration. Your stock was "sporterized" or cut down. Full stock infantry rifles didn't have band retaining springs. The later 1896 cartouche date may have been from the rebuild period, or th...