Search found 1179 matches
- Sat Apr 27, 2024 8:56 pm
- Forum: European Krags
- Topic: What to do now?
- Replies: 6
- Views: 424
Re: What to do now?
After you slug the bore, there are some .268 diameter 6.5 bullets that are sometimes available. They may tighten the groups of your rifle. Made for Carcano rifles by Hornady I believe. I see PRVI makes a .268" 139gr FMJBT also, in stock at Graf's now. I use #2 buckshot to slug 6.5 bores.
- Thu Apr 25, 2024 1:27 pm
- Forum: Ammunition, reloading, shooting, etc
- Topic: OOPS
- Replies: 8
- Views: 414
Re: OOPS
Something else for you to check Paul, noting you neck sized only, is how a clip full with a slightly larger body diameter fits in the Garand. I neck sized some myself at one time and a clip full was a tight fit in my rifle. I'm sure your 47.5gr will be fine.
- Wed Apr 24, 2024 10:48 am
- Forum: Ammunition, reloading, shooting, etc
- Topic: OOPS
- Replies: 8
- Views: 414
Re: OOPS
I use AA4064 too. 47.5gr gave me primers a little flatter at the edge than I like so I went with 46.4, which made my unlimited Garand very happy! Easy to remember too! Sub MOA groups with 168gr Sierra Tipped Matchkings! Someday I'll figure out how to put pics on this board again, oh look, I found it...
- Sun Mar 17, 2024 12:41 am
- Forum: U.S. Military Krags
- Topic: 71
- Replies: 16
- Views: 2871
Re: 71
I thought the first 100 Krags went to VIPs. Be neat to be able to run it back to one of them.
- Sat Mar 09, 2024 4:01 pm
- Forum: Ammunition, reloading, shooting, etc
- Topic: A nice long range rifle with a sad life.
- Replies: 25
- Views: 9911
Re: A nice long range rifle with a sad life.
With rim turned down to .485" a better fitting 6.5 Japanese can be made from .303, 30-40, and mostly likely your 410 shells too. I use .303 mostly, but have some I made from 30-40. I do the sizing before turning the rim down and opening up a .41 magnum shellholder a bit allows me to reload the ...
- Sat Mar 09, 2024 3:33 pm
- Forum: Ammunition, reloading, shooting, etc
- Topic: IMR-7383 RAD-78 with 168 grain FMJ's .30-40
- Replies: 7
- Views: 1413
Re: IMR-7383 RAD-78 with 168 grain FMJ's .30-40
Be very careful with that stuff Chief! I have the slow lot, gave it a little boost in 7.5x55 which worked quite well, tried the same in my Garand and was really flattening primers, maybe bending the op rod! I've not tried it in 30-40 cause boosted 860 works really good. I haven't been able experimen...
- Sun Feb 11, 2024 8:38 pm
- Forum: Ammunition, reloading, shooting, etc
- Topic: Cast bullets in the Krag
- Replies: 3
- Views: 1306
Re: Cast bullets in the Krag
The NOE version of 311284 works well. It casts a larger .302" bore riding nose than most of those that come from Lyman/Ideal molds which I've read can come out .299" or smaller depending on alloy, casting temp etc. The nose shape on the 311284 rides up the Krag feed ramp well also. One wou...
- Sun Jan 28, 2024 2:11 am
- Forum: Sporterized and unofficial modified Krags
- Topic: Repro Kerr sling.
- Replies: 10
- Views: 3846
Re: Repro Kerr sling.
The cloth looks to be of better quality than the one I bought, oh 15yrs ago or so. I tried using it once in prone, not over tight and I could see the rivets were pulling through the cloth.
Re: Rahimi
OK, time to update. The little chief is still in hot water, but there is some question to the validity of the warrant he was served. Sources tell me that he made a purchase of a class 3 firearm through the dept, but it wasn't being kept at the department! Oh, oh! The detective sought the protection ...
- Mon Dec 04, 2023 9:56 pm
- Forum: Ammunition, reloading, shooting, etc
- Topic: 1899 Krag and young buck
- Replies: 17
- Views: 63345
Re: 1899 Krag and young buck
I recall reading in the Frank de Hass' book Bolt Action Rifles that 444 Marlin was doable. That one is already on Ohio's approved list. There are better shaped bullets available now vs back then. Pressure is 44,000 cup.