Krag Collectors Association Forum

Hello<br />I have heard here and read else where of the twist, size between the lands are etc.<br />I'm not clear on what is the correct measurement data.<br />Does anyone have it please.<br />I made a sizing die to size a bullet a little over .264.<br />After I ran it through the barrel I get .264 ...

Any out there reload with cast lead for the Norwegian Krag
If yea please give some specs.

Anybody, anyone, all replies welcome.<br />If pictures are need I can do that also.<br />--------------------------<br />I need help to disassemble a 1903 carbine receiver.<br />No screw on the side plate.<br />No pin in the sear.<br />How does the sear come out without killing the spring.<br />How ...

Thank you on the shop comment, if you would like to see the rest of my shop let me know and I will post a few pictures<br />------------------------------------------------<br />Do you know the size and TPI of this left hand setup, <br />( BARREL THREADS )<br />in case I want to change out barrels, ...

<r>This is what I have done so far.<br />Barrel taken down to bare metal.<br />Not going to touch the receiver for now.<br />Barrel shorten from 22 to 18.5 but added another piece,<br />to mount a muzzle break and front sight incorporated.<br />So the barrel is now 21.5 so did not loose to much on o...

OK finally found it, you are right on all occasions

Hello Again<br />Rear sight goes from 1 to 21 in increments and 2000 max indented.<br />has the mag cut off <br />6.5x55 caliber <br />Is it only 4 grove so i think, I cast-ted some 142 gr lead and ran it through the bore, hard to see the lands and groves is this because of only four groves ??<br />...

<r>I'm new here as of today.<br />Just got what I think is a Norwegen Krag<br />Markings<br />1903 SN# 62346<br />Sling swivel gone screw holes 4 inches from tail of but plate.<br />Looks like a engineer carbine as far as I can tell so far.<br />22 inch barrel adjustable front sight for wind-age<br ...