Search found 32 matches

by geezmo
Thu Jan 20, 2005 4:49 am
Forum: Older threads
Topic: Parts Identificaton
Replies: 1
Views: 1281

Re: Parts Identificaton

That lever is the magazine cutoff. It will prevent the carrier from feeding cartridges, holding the magazine in reserve. In that setting, the rifle is fired as a single shot, loading cartridges individually. A flip of the lever allows the rifle to be fired as a repeater with each cycle of the bolt.
by geezmo
Thu Jan 13, 2005 12:52 am
Forum: Older threads
Topic: What do I have?
Replies: 6
Views: 3510

Re: What do I have?

Ken,<br>A Stokes Kirk gun isn't real bad, but it's definitely not as good as an unmessed with straight military carbine. The barrel should be 21 1/4" from the muzzle to the very front edge of the receiver. The stock could be correct. Lack of markings don't necessarily mean it was restocked. It ...
by geezmo
Tue Jan 11, 2005 10:25 pm
Forum: Older threads
Topic: What do I have?
Replies: 6
Views: 3510

Re: What do I have?

Ken,<br>I just realized that I didn't mention the sling swivels. They are not a good sign. Might just be a sporting accessory added to a carbine, or an indicator that rifle parts were used to assemble this. If you haven't already, go to the home page and click on "Photos". The guys from th...
by geezmo
Tue Jan 11, 2005 10:16 pm
Forum: Older threads
Topic: What do I have?
Replies: 6
Views: 3510

Re: What do I have?

Ken,<br>I see no one has responded, so I'll give it a shot, with what I might know. Stokes Kirk was an old time military goods/surplus dealer similar to Francis Bannerman. He was at one time on 10th St. in Philadelphia. Both "The Krag Rifle" by Brophy and "The Krag Rifle Story" b...
by geezmo
Sun Jan 09, 2005 1:59 am
Forum: Older threads
Topic: date of manufacture or model number?
Replies: 2
Views: 2061

Re: date of manufacture or model number?

The 1894 is the year your receiver was made. It's from a Model 1892 rifle. The year the gun was assembled would appear in a cartouche, below the inspector's initials, on the left side of the stock opposite the bolt handle. If your rifle has a one piece, straight butt plate and a cleaning rod in the ...
by geezmo
Fri Jan 07, 2005 11:19 am
Forum: Older threads
Topic: 1896 Karg Receiver Questions
Replies: 8
Views: 4037

Re: 1896 Karg Receiver Questions

Wayne,
Thanks for your response. Any idea when you'll be published? Will keep an eye out.
Barry
by geezmo
Thu Jan 06, 2005 10:25 pm
Forum: Older threads
Topic: Krag Book Recommendation-Brophy or Mallory/Olson
Replies: 16
Views: 84938

Re: Krag Book Recommendation-Brophy or Mallory/Ols

If you're going to get serious about Krags, I would eventually plan to own both. I feel that they definitely supplement each other. I have an older copy of Brophy's and the photos are clearer than my second edition of Mallory/Olson. The info in them is definitely supplemental. If you can only afford...
by geezmo
Thu Jan 06, 2005 10:11 pm
Forum: Older threads
Topic: 1896 Karg Receiver Questions
Replies: 8
Views: 4037

Re: 1896 Karg Receiver Questions

Wayne,
Flayderman mentions the Model 1898, serial no. 152670 as the cutoff between antique and modern, by federal law. Does this match what your letter from ATF states?
Thanks,
Barry
by geezmo
Thu Jan 06, 2005 11:59 am
Forum: Older threads
Topic: help with Krag history
Replies: 3
Views: 1783

Re: help with Krag history

Didn't see that serial number in Mallory's book, apparently no use or issuance info on this particular rifle know to date. You can tell if the barrel was cut with a tape. It should be 30" long. Is the stock full length, with a double strap barrel band and bayonet lug out front? Is there a clean...
by geezmo
Tue Dec 28, 2004 2:29 pm
Forum: Older threads
Topic: 1896 Karg Receiver Questions
Replies: 8
Views: 4037

Re: 1896 Karg Receiver Questions

Mark,<br>1896 dated receiver is antique under federal law. Some sellers may require buyer to provide a copy of driver's license to establish age, and/or a signed statement that there is no state or local law that effects a sale to them.<br><br>What condition is it in, and how much are your asking?<b...