Search found 1179 matches
- Sat Jul 29, 2023 3:09 pm
- Forum: Chit-Chat
- Topic: Camp Perry 2023
- Replies: 10
- Views: 1638
Re: Camp Perry 2023
Not a bad AR group, but a good example of why they tell you not to point up at the target! There's always someone has a problem, they've saved me from last place many times!
- Wed Jul 26, 2023 8:34 pm
- Forum: Ammunition, reloading, shooting, etc
- Topic: Decent into Madness - Lack of Case Trimming
- Replies: 23
- Views: 29936
Re: Decent into Madness - Lack of Case Trimming
A slightly smaller expander ball will take away the need for crimping, especially with a bullet that does not go below the neck/shoulder junction. I have a few different size expanders since I shoot various sized cast bullets. I've got some really good groups with cases that were a few thousandths t...
- Fri Jun 30, 2023 2:09 pm
- Forum: Ammunition, reloading, shooting, etc
- Topic: Norwegian Krag 6.5x55 safe loads!
- Replies: 8
- Views: 3618
Re: Norwegian Krag 6.5x55 safe loads!
There is a lot of 6.5x55 data with start pressures and some relatively mild max pressures of around 46,000CUP on the Hodgdon reloading website. Pretty good selection of powders used too.
- Mon May 22, 2023 9:19 pm
- Forum: Ammunition, reloading, shooting, etc
- Topic: CCI Large Rifle BR-2 Primers
- Replies: 5
- Views: 1799
Re: CCI Large Rifle BR-2 Primers
Swiped someone else's answer to the same question. It's over 10yrs old. "Rumor has it, and I *don't* have this on good authority but seems I've read/heard this from several different sources....that the difference between a CCI200 and CCI BR2 is which employee is overseeing the machine while th...
- Sat May 06, 2023 9:18 am
- Forum: Ammunition, reloading, shooting, etc
- Topic: The Famous Krag Cast Bullet
- Replies: 4
- Views: 1824
Re: The Famous Krag Cast Bullet
Mt first 30 caliber mold also, but the NOE version that has a .302 bore rider for those slightly oversized Krag bores. At the time I bought it a lot of people were complaining about undersize Lyman molds. Shoots good, I wouldn't be afraid to shoot a match with some of the better loads. Always reliab...
- Fri Feb 10, 2023 5:46 am
- Forum: Ammunition, reloading, shooting, etc
- Topic: There I was...
- Replies: 19
- Views: 4145
Re: There I was...
That is a very big flash hole in those cases. I've experimented some with changing the diameter of flash holes, bigger ones do cause more primer flattening with all other variables the same.
- Fri Feb 10, 2023 5:31 am
- Forum: Ammunition, reloading, shooting, etc
- Topic: .30 Purdey Flanged in a US Krag
- Replies: 6
- Views: 1794
Re: .30 Purdey Flanged in a US Krag
Back in the 90s I found George Nonte's book on case conversions at my local university's library. I noticed the dimensions the 30-40 and Purdey shared. I think one can get a 150gr going 2700fps out of a Krag w/o too much pressure, with the right powder, somewhere in the 4350 burn rate, but not as sl...
- Mon Feb 06, 2023 10:12 pm
- Forum: Sporterized and unofficial modified Krags
- Topic: Restore it or Leave it.
- Replies: 7
- Views: 2169
Re: Restore it or Leave it.
It'd be tough to find a piece to match that Italian walnut in order to fabricate the rest of the forearm. I had one made of European walnut that's still around somewhere and I have a few sample pieces of European walnut that the vendor sent me. None wide enough. I noticed that Japanese Type I rifles...
- Mon Feb 06, 2023 10:02 pm
- Forum: Sporterized and unofficial modified Krags
- Topic: Newbie with butchered Krag
- Replies: 10
- Views: 2340
Re: Newbie with butchered Krag
After you cleaned the finish off I immediately noticed the cut ahead of the magazine gate. I wondered what it was and now see the S&K mount.
- Sat Jan 28, 2023 1:49 am
- Forum: Ammunition, reloading, shooting, etc
- Topic: There I was...
- Replies: 19
- Views: 4145
Re: There I was...
It's pretty common with the K31 to accidentally stuff the bullet into the nigh nonexistant throat. I went with bullets that are of a secant ogive design. The Sierra Tipped Matchkings can be seated out to max magazine length but tangent ogive bullets like Nosler Custom Competitions or regular Matchki...