Stock Repair

Ammunition, reloading, shooting, etc
Post Reply
User avatar
carbon outlaw
Posts: 279
Joined: Fri Jul 04, 2014 9:19 pm

Stock Repair

Post by carbon outlaw »

.. I buy Krag stocks on Ebay and refinish them and resell them ... I do look for Krag stocks that need a lot of work and buy them if they are cheep ... These are two I bought one someone had tried to refinish it and the other one was very nice although was missing the end cap ... I notched one piece of wood out glued it to another piece of wood then clamped it to another piece and used a 3/4 inch drill to drill out the center and finished by sanding it out using a piece of sand paper raped around a gun barrel ...
Attachments
DSCN1474.JPG
DSCN1474.JPG (190.68 KiB) Viewed 1236 times
DSCN1473.JPG
DSCN1473.JPG (170.43 KiB) Viewed 1236 times
DSCN1472.JPG
DSCN1472.JPG (211.24 KiB) Viewed 1236 times
DSCN1471.JPG
DSCN1471.JPG (176.16 KiB) Viewed 1236 times
DSCN1470.JPG
DSCN1470.JPG (183.65 KiB) Viewed 1236 times

User avatar
carbon outlaw
Posts: 279
Joined: Fri Jul 04, 2014 9:19 pm

Re: Stock Repair

Post by carbon outlaw »

and
Attachments
DSCN1480.JPG
DSCN1480.JPG (177.43 KiB) Viewed 1235 times
DSCN1479.JPG
DSCN1479.JPG (198.52 KiB) Viewed 1235 times
DSCN1478.JPG
DSCN1478.JPG (188.71 KiB) Viewed 1235 times
DSCN1477.JPG
DSCN1477.JPG (202.33 KiB) Viewed 1235 times
DSCN1476.JPG
DSCN1476.JPG (204.25 KiB) Viewed 1235 times

User avatar
carbon outlaw
Posts: 279
Joined: Fri Jul 04, 2014 9:19 pm

Re: Stock Repair

Post by carbon outlaw »

and drilling the hole threw the middle ...
Attachments
DSCN1475.JPG
DSCN1475.JPG (180.1 KiB) Viewed 1235 times

User avatar
carbon outlaw
Posts: 279
Joined: Fri Jul 04, 2014 9:19 pm

Re: Stock Repair

Post by carbon outlaw »

I got my end piece finished up today ... got it glued on shaped it with a hand plainer and sanded the rest ... have a look ...
Attachments
DSCN1485.JPG
DSCN1485.JPG (211.16 KiB) Viewed 1219 times
DSCN1484.JPG
DSCN1484.JPG (196.65 KiB) Viewed 1219 times
DSCN1483.JPG
DSCN1483.JPG (229.41 KiB) Viewed 1219 times
DSCN1482.JPG
DSCN1482.JPG (207.65 KiB) Viewed 1219 times
DSCN1481.JPG
DSCN1481.JPG (223.67 KiB) Viewed 1219 times

User avatar
carbon outlaw
Posts: 279
Joined: Fri Jul 04, 2014 9:19 pm

Re: Stock Repair

Post by carbon outlaw »

and
Attachments
DSCN1491.JPG
DSCN1491.JPG (194.91 KiB) Viewed 1219 times
DSCN1490.JPG
DSCN1490.JPG (188.4 KiB) Viewed 1219 times
DSCN1489.JPG
DSCN1489.JPG (180.31 KiB) Viewed 1219 times
DSCN1488.JPG
DSCN1488.JPG (197.46 KiB) Viewed 1219 times
DSCN1486.JPG
DSCN1486.JPG (201.77 KiB) Viewed 1219 times

User avatar
butlersrangers
Posts: 9827
Joined: Wed Oct 07, 2009 11:35 pm
Location: Below the Bridge, Michigan

Re: Stock Repair

Post by butlersrangers »

Nice repair job.

Post Reply