A pair of ugly ebay offerings.
I don't know who, where, when or why? Some things challenge explanation and cannot be 'unseen'.
The first Krag has been made a DEWAT. It will be scary, if someone tries to 'weld' the action sections back together!
The second altered action gives new meaning to "magazine cut-off"! There is an apparent flaw at the rear of the bolt.
This 'lovely' must have had its original barrel-shank threaded, in order to accept a small caliber replacement barrel for a center-fire cartridge.
Likely, it was used as a single-shot and fitted to a conventional looking replacement stock.
The receiver has been drilled & tapped for a front action-screw.
A pair of Krag Krimes!
- butlersrangers
- Posts: 9880
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
A pair of Krag Krimes!
- Attachments
-
- gun crime1.jpg (106.93 KiB) Viewed 2082 times
-
- gun crime2.jpg (172.03 KiB) Viewed 2082 times
-
- gun crime0.jpg (322.64 KiB) Viewed 2082 times
-
- gun crime001.jpg (120.62 KiB) Viewed 2082 times
Last edited by butlersrangers on Sun Aug 01, 2021 9:35 pm, edited 1 time in total.
Re: A pair of Krag Krimes!
I also noticed that 1896 on ebay, I sure hope this seller did not do this so he would be able to sell the barrel without removing it from the receiver. One less Krag out there is not something I'm happy to see, let alone a 1896 receiver.
- butlersrangers
- Posts: 9880
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
Re: A pair of Krag Krimes!
The model 1896 barrel and action could have been sold and sent through the mail intact, as a non-firearm.
The receiver's serial number documents pre-1898 manufacture and made it exempt from BATF regulations.
Unless there was some fatal metal flaw and a need to avoid a future catastrophe, there was no rationale for cutting the receiver into pieces.
The receiver's serial number documents pre-1898 manufacture and made it exempt from BATF regulations.
Unless there was some fatal metal flaw and a need to avoid a future catastrophe, there was no rationale for cutting the receiver into pieces.
Re: A pair of Krag Krimes!
I was thinking this seller maybe have wanted the ability to sell it on eBay, however I very much hope there was some flaw or other reason this reciever was demilled. Although in that case I likely would have drilled through the bottom locking lug and welded a pin to prevent it ever being usable and had a super cool paperweight.
- butlersrangers
- Posts: 9880
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
Re: A pair of Krag Krimes!
Probably a 'Hate Crime'.
Re: A pair of Krag Krimes!
BR your definitely right about that!
Re: A pair of Krag Krimes!
Looks like someone got a sawzall for a present and just had to try it on some real steel. A shame for sure.
Re: A pair of Krag Krimes!
One the one with the magazine removed, does anyone else see the barrel cut off with smaller threads tapped into it? Adapted to a small threaded barrel maybe? Terrible workmanship, I could do much better work with a hack saw and a file. Looks like he had no plan just started removing metal.
forward hold down screw tapped into the bottom?
forward hold down screw tapped into the bottom?
Re: A pair of Krag Krimes!
Whoops Br, I see that you had already mentioned the internal threads in the barrel stub and the forward hold down screw. I scrolled down to see the ugliness too fast to read what you wrote.
What do you all make of the trigger? Maybe the plan was to weld a different shape on too the stub. Again no evidence of any plan. Someone gave him a metal cutting ax for his birthday and he just had to cut on something?
What do you all make of the trigger? Maybe the plan was to weld a different shape on too the stub. Again no evidence of any plan. Someone gave him a metal cutting ax for his birthday and he just had to cut on something?
- butlersrangers
- Posts: 9880
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
Re: A pair of Krag Krimes!
Maybe he had some intention to adapt it to a set-trigger?