Annealing
Annealing
I recently started annealing cases with the Ballistic Recreations setup that uses a Lee precision melter and potassium salts. The entire setup cost less than $150 and it's simple to use and consistent. I would have never considered annealing but my scoring partner at Talledega told me about it and I thought I'd give it a try. The kit comes with a case holder made to fit the Lee melter, a thermocouple/temp gage and a jar of potassium salts.
Re: Annealing
Thanks for the info. I had tried using molten lead setting the heat with a thermometer. Then coated the case necks with oil before dipping them in the molten lead. The lead coated the case necks sometimes and made a mess.
I assume the potassium salts cause no corrosion or embrittlement if you clean them quickly?
I assume the potassium salts cause no corrosion or embrittlement if you clean them quickly?
- psteinmayer
- Posts: 2692
- Joined: Tue Aug 30, 2011 2:31 am
Re: Annealing
There is a much simpler way to anneal. I just use the trimming case holder to hold them in my drill, and then use a small butane torch to heat the necks to the shoulder while they spin. As soon as the brass changes color to just past the shoulder, drop them into a pan and let them cool. Been doing it this way for years, and I've got more than 20 reloads on some of my brass!
- carbon outlaw
- Posts: 279
- Joined: Fri Jul 04, 2014 9:19 pm
Re: Annealing
I use map gas just because it heats it up faster .... Another thing I do is to just do neck recizing how I do this is using ideal Lyman 310 30-40 krag neck recizer and use a adapter so I can use it in my RCBS reloading press ... Really the only time I have had trouble is using someone else's used brass ... Some brass I have reloaded hundreds of time ... Just be good to your brass ...
Re: Annealing
I tried matching the colors on new factory annealed cases and found it difficult. I took a color blindness test and the result labeled me "extreme deutan" the report said that I see peanut butter as green and I said "Yeah, isn't green" also said I see green light as white, always wondered why they were called green lights. My brother took a color blindness test when he was in grade school and he was extremely color blind turns out I am worse than him, just did not know it.
So the colors the rest of you see when annealing may not be what I see.
A fast fool proof way to anneal case necks is welcome to me.
So the colors the rest of you see when annealing may not be what I see.
A fast fool proof way to anneal case necks is welcome to me.
- butlersrangers
- Posts: 9916
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
Re: Annealing
'Real Men' anneal by touch!
Re: Annealing
Too funny!
I guess I could ask you to make a youtube video showing me how.
I guess I could ask you to make a youtube video showing me how.
Re: Annealing
I use map gas just because it heats it up faster .... Another thing I do is to just do neck recizing how I do this is using ideal Lyman 310 30-40 krag neck recizer and use a adapter so I can use it in my RCBS reloading press ... Really the only time I have had trouble is using someone else's used brass ... Some brass I have reloaded hundreds of time ... Just be good to your brass ...
Hundreds ? Sorry, but I find that very hard to believe.
- Parashooter
- Posts: 707
- Joined: Thu Feb 04, 2010 5:14 am
- Location: Kragmudgeon House, CT
Re: Annealing
'Real Men' anneal by touch!
Like this -
Like this -