Hey all, am trying to find a new screw to work for the sideplate and sight with a Krag Redfield 70KH peep.
I understand it's a .187x26tpi screw - and that there are a handful of Krag and 1903 springfield screws that are the same.
I don't want to order the wrong thing.... I found this:
https://www.libertytreecollectors.com/p ... category=0
I also found this:
https://www.ebay.com/itm/274581152715 (this one looks interesting because it looks like the threaded portion is longer, which could be advantageous when fitting/shortening the screw to work.
Are either of these correct? Am I looking at the right thing? Do you have another source you'd recommend?
Redfield Peep Screw for side plate
- butlersrangers
- Posts: 9909
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
Re: Redfield Peep Screw for side plate
Reproduction screws made for Krag and 1903 Springfield barrel-band & swivel and front stacking-swivel can be adapted to hold Redfield 'no-drill' and Krag side-plate in place.
- Attachments
-
- Redfield_screw_improvise_001 (2).jpg (75.34 KiB) Viewed 848 times
-
- Posts: 36
- Joined: Sun Jan 19, 2020 3:28 pm
Re: Redfield Peep Screw for side plate
Thank you for linking this picture here and your PM!!! I read about this but hadn't seen the comparison picture.