Can't find info on this gun

U.S. Military Krags
kylemountainguns
Posts: 2
Joined: Thu Jun 08, 2023 5:47 pm

Can't find info on this gun

Post by kylemountainguns »

Purchased a rifle with barrel/action noting model 1898. The barrel is 24" and the stock seems to be a carbine. Anyone know if this is an 1898 variation or what would explain this?

Photo Attached.


Thanks for any help.
Attachments
IMG_3126.jpg
IMG_3126.jpg (183.06 KiB) Viewed 1086 times

FredC
Posts: 1991
Joined: Fri May 31, 2013 4:38 pm
Location: Dewees Texas

Re: Can't find info on this gun

Post by FredC »

Welcome to the KCA.
It certainly is a nice looking Krag. As fa as i know there was none produced with a 24 inch barrel. All rifles had 30 inches except a very small number of BoOF rifles with 26". Carbines of course were 22inches. Your front sight looks like a modified or aftermarket substitute. A close up will tell more.
The stock looks nice, others will be able to tell if it is a carbine stock of a modified rifle stock. A close up of the front end of the stock will give more clues.

kylemountainguns
Posts: 2
Joined: Thu Jun 08, 2023 5:47 pm

Re: Can't find info on this gun

Post by kylemountainguns »

Here are other photos.
Attachments
IMG_3141.jpg
IMG_3141.jpg (362.26 KiB) Viewed 1081 times
IMG_3140.jpg
IMG_3140.jpg (368.13 KiB) Viewed 1081 times
IMG_3139.jpg
IMG_3139.jpg (168.22 KiB) Viewed 1081 times
IMG_3138.jpg
IMG_3138.jpg (267.62 KiB) Viewed 1081 times
IMG_3137.jpg
IMG_3137.jpg (346.28 KiB) Viewed 1081 times

Whig
Posts: 1992
Joined: Sat Sep 24, 2016 12:53 am

Re: Can't find info on this gun

Post by Whig »

Kyle,

Welcome to the KCA forum!

You have a cut down rifle barrel in a cut down rifle stock with no hand guard, an after market front sight but a nice Model 1901 carbine rear sight. A lot has been done to alter this Krag rifle from its original Springfield Armory configuration but if the bore is good, it should be a good shooting Krag. These sporterized Krags were commonly made by different people or places in the 20s and 30s when Krags were easy to buy for a couple dollars and people wanted nice hunting rifles. Cut down 30 inch barreled Krag rifles were easier to carry to hunt with and .30-40 Krag ammo was plentiful and inexpensive years ago.

If you plan to shoot it, make sure the bore looks clear and that the bolt functions well and that there are no obvious cracks in the bolt. Very uncommon but some have had problems. Most of these shoot well and all factory Krag ammunition is fine to use in these Krags. Keep us informed.

User avatar
butlersrangers
Posts: 9827
Joined: Wed Oct 07, 2009 11:35 pm
Location: Below the Bridge, Michigan

Re: Can't find info on this gun

Post by butlersrangers »

Welcome Kyle - What 'Whig' said!

Krag rifles that were cut-down for Deer Hunting are a lot of fun, but just not very valuable.
They often have great bores.

The 'banded' front-sight appears to be a 1903 Springfield sight. Your carbine rear-sight is worth about $200 to $275.
Attachments
range guns.JPG
range guns.JPG (241.39 KiB) Viewed 1073 times

User avatar
butlersrangers
Posts: 9827
Joined: Wed Oct 07, 2009 11:35 pm
Location: Below the Bridge, Michigan

Re: Can't find info on this gun

Post by butlersrangers »

A couple of additional points about Kyle's stock.
I believe it is actually a 'cut-down' model 1896 rifle stock. The 'scalloped' relief around the bolt-handle, (indicated by the white arrow), is not present on model 1898 rifle stocks.
Also, the barrel-band has been moved to the rear about 2 & 1/4 inches. Now the barrel-band is behind the stock mortise for the front handguard clip, (note red arrow).
Attachments
a newbstock.jpg
a newbstock.jpg (231.86 KiB) Viewed 1035 times

User avatar
psteinmayer
Posts: 2677
Joined: Tue Aug 30, 2011 2:31 am

Re: Can't find info on this gun

Post by psteinmayer »

Hi... and let me add my welcome to the KCA forum! You've found a great bunch of Krag enthusiasts here!

That is a sweet looking cutdown sporter there... it should be a great shooter!

I suspect that with the barrel band moved rearward as it is, it no longer fits the dimensions of the barrel (because of the taper) unless the person who sporterized it also filed the band to enlarge the radius. With the 1898 barrelled action in the 1896 stock... could this be a Bannerman?

FredC
Posts: 1991
Joined: Fri May 31, 2013 4:38 pm
Location: Dewees Texas

Re: Can't find info on this gun

Post by FredC »

butlersrangers wrote: Fri Jun 09, 2023 3:35 am A couple of additional points about Kyle's stock.
I believe it is actually a 'cut-down' model 1896 rifle stock. The 'scalloped' relief around the bolt-handle, (indicated by the white arrow), is not present on model 1898 rifle stocks.
Also, the barrel-band has been moved to the rear about 2 & 1/4 inches. Now the barrel-band is behind the stock mortise for the front handguard clip, (note red arrow).
I did not catch the cut out on the stock. The serial number is too high for a 96 isn't it? With the shadow around the bolt and 96 notch in the stock I am thinking that is a 98 receiver. Will a 98 receiver drop into a 96 stock?
Certainly a beautiful rifle with a colorful history.

Whig
Posts: 1992
Joined: Sat Sep 24, 2016 12:53 am

Re: Can't find info on this gun

Post by Whig »

The '98 drops into the '96 but not the other way around.

User avatar
butlersrangers
Posts: 9827
Joined: Wed Oct 07, 2009 11:35 pm
Location: Below the Bridge, Michigan

Re: Can't find info on this gun

Post by butlersrangers »

Whig is correct about a model 1898 Krag action being able to fit into a model 1896 stock.

It just leaves a large gap around the bolt-handle, which is a bit unsightly.
(Attached is a 'brightened' copy of Kyle's stock).

Out of need, I once altered a model 1898 (cut-down) stock, so that it would accept a model 1896 action.
It was fun proving to myself that it could be done.
Attachments
a newbstock.jpg
a newbstock.jpg (92.83 KiB) Viewed 995 times
Krag altering 98 to 96-a.jpg
Krag altering 98 to 96-a.jpg (599.56 KiB) Viewed 995 times
krag altering 98 to 96-b.jpg
krag altering 98 to 96-b.jpg (587.05 KiB) Viewed 995 times

Post Reply