RickyG - It appears your Krag's serial number is 392054.
This would indicate it was built, as a rifle, in May or June of 1902.
Your aftermarket receiver-sight is a Redfield #70 KH, ('no-drill' model), with 'Hunter's Knobs'.
This is a very nice sight, but, the top staff needs to be removed, in order to take the bolt out of the action, for routine bore cleaning, from the breech.
(I have found it easier to just take off the whole sight, by simply removing the extra-long side-plate screw).
The Safety-Lever is missing from your bolt. (I don't see any parts alteration that would prevent a simple replacement).
I wonder if a prior owner once installed a Buehler Safety or some other custom replacement?
You have acquired a novel 'Hunting Krag' with a very interesting 'flat magazine-gate'.
I like the rendering of the 'Butter Knife' bolt handle.
I copied your photo, which shows the 'barrel-collar', that FredC was referring to. Like Fred, I was curious if there's an additional anchor point between the barrel and forestock?
A molding or collar was common on custom Krags to soften the transition between the barrel diameter and action 'ring'. It is neat that this collar serves another and useful purpose.
We will need an after-action report when you try her out at the Range!
Very modified krag
- butlersrangers
- Posts: 9898
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
Re: Very modified krag
- Attachments
-
- Redfield #70K no-drill sight (2).jpg (94.77 KiB) Viewed 15048 times
-
- barrel collar edit.jpeg (416.44 KiB) Viewed 15053 times
-
- Posts: 12
- Joined: Wed Feb 08, 2023 4:13 am
Re: Very modified krag
Could I please get a couple of extra photos?
Id like to see close up details of the magazine follower, and its attachments to the side plate.
Also of the button that locks the plate closed. Both sides and of the receiver side as well. I am right at this point with my grandpa's Krag and this looks more like the direction I'd like to go, vs the hand drawn schematics that I have from the 1950's.
Thank you
Mark
Id like to see close up details of the magazine follower, and its attachments to the side plate.
Also of the button that locks the plate closed. Both sides and of the receiver side as well. I am right at this point with my grandpa's Krag and this looks more like the direction I'd like to go, vs the hand drawn schematics that I have from the 1950's.
Thank you
Mark
Re: Very modified krag
Yeah its on loan at the moment ill get you some asap
Re: Very modified krag
May not be any more updates.... a buddy of mine is enamored with it. Good guy not a lot of funds. I may gift it.