Sizing Die Mod
Sizing Die Mod
Anybody opened up the neck area on a full length sizing die? How much did you open it up? I started doing that with my 30-06 dies. I bought 3 used ones off ebay and opened them up in 2 thou increments instead of using my my bushing die. Then I used a mandrel. The unsized portion of the neck was sticking in my Giraud trimmer. No bushing dies for Krag anyway.
Re: Sizing Die Mod
I think standard dies over work the necks also. I thought the dies were to hard to machine and have lapped them out. Now that I think about it I am not sure if I have tried to scratch a die with a file to see how hard it is. what ever way you do it try not to change the centerline. A member here did some experiments with dies that made the necks off center and it really affected accuracy.
-
- Posts: 1179
- Joined: Thu Sep 10, 2009 5:00 am
- Location: Upper Appalachia aka SE Ohio
Re: Sizing Die Mod
Got a bushing die for a .308? Leaves the case unsupported, but as long as you're attentive when you put the brass in the shellholder, it'll do fine.