Would not think a 98 Mauser would need one as the trigger screws are widely spaced. The stock is not so thin under the magazine like a Krag. Also it would negate the advantages of your free floating barrel.
That said another nice looking sporter.
From other posts it is allowable here to mention scripture, a very comforting one to me is when it says the last enemy death will be brought to nothing. Would also think the same applies to aging. Something to look forward to.
Looked at you post again, you sneaked it off. So many today do that for bad reasons. Doing that to improve it and go on a once in a lifetime adventure, that is different. Hats off to you.
Barrel Band for Krag Sporter
Re: Barrel Band for Krag Sporter
Thank You FredC.
It is a genuine pleasure to have gotten to know you through this forum, through our email communication and while working on this project together. There certainly are lotsa good folks in this kragcollectorsassociation. Proud to be a member!
Thanks again,
Jim
It is a genuine pleasure to have gotten to know you through this forum, through our email communication and while working on this project together. There certainly are lotsa good folks in this kragcollectorsassociation. Proud to be a member!
Thanks again,
Jim
Re: Barrel Band for Krag Sporter
For anyone interested, there is a series in the Machinist work shop magazine about adding a barrel band to a Krag. The author inherited a partially sporterized 94 Krag and finished the project. I will try to contact him to see if he will contribute to a thread here.
For anyone interested in making a barrel band and has a few machine tools in the garage it would be an good read:
http://www.machinistsworkshop.net/april-may-2020/
So many ways to skin a cat.
For anyone interested in making a barrel band and has a few machine tools in the garage it would be an good read:
http://www.machinistsworkshop.net/april-may-2020/
So many ways to skin a cat.
- carbon outlaw
- Posts: 279
- Joined: Fri Jul 04, 2014 9:19 pm
Re: Barrel Band for Krag Sporter
this barrel band come off a krag sporter ..
Re: Barrel Band for Krag Sporter
So many ways to skin a cat.
If I am seeing that band and clamp? correctly the clamp does double duty as a sling attachment? The screw goes into the end of the fore end?
Can the band be spread enough to go around a an original SA front sight?
If I am seeing that band and clamp? correctly the clamp does double duty as a sling attachment? The screw goes into the end of the fore end?
Can the band be spread enough to go around a an original SA front sight?
Re: Barrel Band for Krag Sporter
Hello Krag enthusiasts,
I thought I would share some pictures of a barrel band I had on a 1894 Norwegian Krag sporter. Possibly another idea for the barrel band do-it-yourself. It almost looks like a Mauser type bolt extractor collar used as the band. Then a short piece of 3/8" round stock drilled and tapped through for the sling swivel stud. And a dovetail filed on the end to retain the band itself. The swivel screw was just long enough to thread between the extractor collar ears and hold tension in the dovetail when assembled on the rifle. The brass disk simply acted as an escutcheon. I thought I would share this as it only required drilling round holes for installation, not much chisel inletting. I am not sure who made this one but, it seems simple enough for a home project.
Regards,
sixfive
I thought I would share some pictures of a barrel band I had on a 1894 Norwegian Krag sporter. Possibly another idea for the barrel band do-it-yourself. It almost looks like a Mauser type bolt extractor collar used as the band. Then a short piece of 3/8" round stock drilled and tapped through for the sling swivel stud. And a dovetail filed on the end to retain the band itself. The swivel screw was just long enough to thread between the extractor collar ears and hold tension in the dovetail when assembled on the rifle. The brass disk simply acted as an escutcheon. I thought I would share this as it only required drilling round holes for installation, not much chisel inletting. I am not sure who made this one but, it seems simple enough for a home project.
Regards,
sixfive