Re: My gaudy Garand
Posted: Tue Mar 26, 2019 3:37 pm
I wasn't satisfied with the fit of the front handguard. I could feel a little wiggle in it and traced it back to the pinned lower band. I have the front handguard solidly attached to the band with screws and epoxy. I loosened the four set screws in the top of the scope mount, leaving the saddle screws tight and using a punch on the saddle I tapped the handguard/mount forward into more solid contact with the lower band. Got it all back together now, barrel nicely centered, and got rid of the wiggle. There's now about 1/16" gap between the front of the receiver ring and the rear of the mount. Should have tapped that mount forward last time I assembled things!