New to me sporter
Re: New to me sporter
i have the same split as that one has, but its crack is only 2-2 1/2" long. its next on the bucket list.
Ad Reipublicae his Civitatum Foederatarum Americae, ego sum fortis et libero. Ego autem non exieris ad impios communistarum socialismi. Ora imagines in vestri demented mentem, quod vos mos have misericordia, quia non.
Μολών λαβέ
Μολών λαβέ
- butlersrangers
- Posts: 9916
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
Re: New to me sporter
'Jefe' - It sounds like you have a good repair plan. Fortunately, there is no stress in that area and your repair should last forever.
How is that rear sling-swivel anchored?
How is that rear sling-swivel anchored?
Re: New to me sporter
It's in there with a wood screw, same as the front, shouldn't be to hard to fill. I'm leaving them for now while I track down proper sling hardware.
I've got an order of brass and dies showing up tomorrow, so I'm going to load up some dummy rounds and function test it, then load up some rounds to shoot. Hopefully I'll get to shoot it next weekend, as I'm busy this one.
I've got an order of brass and dies showing up tomorrow, so I'm going to load up some dummy rounds and function test it, then load up some rounds to shoot. Hopefully I'll get to shoot it next weekend, as I'm busy this one.
- Attachments
-
- 20210310_202555~3.jpg (361.17 KiB) Viewed 1418 times
- butlersrangers
- Posts: 9916
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
Re: New to me sporter
'Jefe' - Unless you are going to use a sling as a 'carry strap' for hunting, there is no need for a sling.
The regular U.S. Krag carbines had no provision for a sling.
If you inlet a regular Krag rifle 'butt-swivel' into your carbine stock, you will seriously harm its value.
For target shooting purposes, just the front swivel is needed. A regular Krag rifle barrel-band & swivel will fit on your carbine stock without alteration.
IMHO - If you need a rear-swivel, just stay with the 'commercial' one you have or utilize a screw-in 'quick-detachable' stud & swivel. (The wood damage is already done and pretty easily repaired).
The regular U.S. Krag carbines had no provision for a sling.
If you inlet a regular Krag rifle 'butt-swivel' into your carbine stock, you will seriously harm its value.
For target shooting purposes, just the front swivel is needed. A regular Krag rifle barrel-band & swivel will fit on your carbine stock without alteration.
IMHO - If you need a rear-swivel, just stay with the 'commercial' one you have or utilize a screw-in 'quick-detachable' stud & swivel. (The wood damage is already done and pretty easily repaired).