October 2022 I was given an 1899 barreled action. Charles McArthur repaired the original 1901 carbine site for me. I am grateful.
Yesterday I toock this buck with it. I got the stock with 1899 Catouche off of Ebay. The shot was about 70 yards. The buck went down and never moved.
1899 Krag and young buck
-
- Posts: 252
- Joined: Fri Jul 11, 2003 9:49 pm
1899 Krag and young buck
- Attachments
-
- BUCK AND 1899.jpeg (735.16 KiB) Viewed 31880 times
Re: 1899 Krag and young buck
Outstanding!!!! We are still "busting the brush" with our Krags hoping for the same result!!
- butlersrangers
- Posts: 9908
- Joined: Wed Oct 07, 2009 11:35 pm
- Location: Below the Bridge, Michigan
Re: 1899 Krag and young buck
Nice shooting and nice restoration, Mark!
Re: 1899 Krag and young buck
Awesome!
14EH AIT Instructor-PATRIOT Fire Control Enhanced Operator/Maintainer
Re: 1899 Krag and young buck
Congratulations on your restoration of a now beautiful carbine ... and on your harvest of a beautiful buck!!! Sincerely. bruce.
Re: 1899 Krag and young buck
Mark_Daiute wrote: ↑Sat Nov 25, 2023 12:19 pm October 2022 I was given an 1899 barreled action. Charles McArthur repaired the original 1901 carbine site for me. I am grateful.
Yesterday I toock this buck with it. I got the stock with 1899 Catouche off of Ebay. The shot was about 70 yards. The buck went down and never moved.
And the answer to the question everyone wants to know is onions and carrots or sauted mushrooms?
Deacon in the Church of the Mighty Krag. Member of PETA (People Eating Tasty Animals). Liberty Works Radio
Re: 1899 Krag and young buck
So what load did you use Mark, your own recipe or factory?
-
- Posts: 1179
- Joined: Thu Sep 10, 2009 5:00 am
- Location: Upper Appalachia aka SE Ohio
Re: 1899 Krag and young buck
I'm going to have to build me a "straight wall cartridge" Krag someday. I often think about it, but likely will never get around to it. Good job Mark!
Re: 1899 Krag and young buck
I've seen a dandy rebuilt to .405 WCF, but it took a major rework of the magazine. If you shorten the .405 WCF case, it should work. Aren't there case length restrictions with the "straight wall cartridge" requirements?madsenshooter wrote: ↑Mon Nov 27, 2023 11:10 am I'm going to have to build me a "straight wall cartridge" Krag someday. I often think about it, but likely will never get around to it. Good job Mark!